Complies with ATX and ATX12V standard
Active Power Factor Correction Meeting with EN61000-3-2
High efficiency and reliability
Remote On/Off function
Internal 12V DC 8cm fan included
Noise Killer (Thermal fan speed control function)
Low noise and ripple

Specifications:

Complies with FCC part 15 subpart J class B and CISPR 22 Class B
Output over voltage, short circuit, and over current protection
100% Hi-pot, ATE, and burn-in tested
Re-settable power shut down
Approved by UL 1950, CSA C22.2 Level 3, IEC 950, TUV 60950, NEMKO (CB Report)
Temperature Range: Operating 0° C ~ +50° C on full load; storage & shipping -20° C ~ +65° C
Humidity: 95% on operating and 95% on storage
Dielectric Withstand: Primary to frame ground 1800V AC for 1 second
Efficiency: 65% at minimum measured at nominal AC main voltage and frequency with maximum load on all output
Rise Time: Less than 20ms on all output
Hold-up Time: 17ms minimum at nominal input voltage
Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible)
Leakage Current: Not exceed 0.75mA at 115V AC, 60Hz
MTBF: 100,000 hours on maximum load at +25° C degree
Dimensions (WxHxL): 150x86x140mm/5.9x3.4x5.5 inches

Click here for more info.