Click to enlarge

The CSH-2402S switch lets users divide their networks into 24 independent network segments. A major advantage is each port provides its own bandwidth. This makes shifting available bandwidths as easy as changing a cable at the flick of a switch! Each port is further equipped with a built-in Auto-negotiation function that senses for the fastest possible speed 10Mbps to 100Mbps or 200Mbps!(Full duplex), then automatically sets the port to operate at that speed. The dual speed capability makes the switch the perfect bridge for connecting 100Mbps with 10Mbps segments.

An internal full range switching power supply is built into the switch which means no external power adaptor is required and the unit is CTick certified. The LEDs display real-time traffic status to monitor and diagnose the network. It features non-blocking performance and improves access to network resources and includes Store-and-Forward Technology to instantly eliminate bad packets

Features:

• 24 10/100Mbps Switch Ports with 2 ports share Copper/Fiber by push button
• Each Port Creates an Independent Network Segment
• Support Store-and-Forward Technology
• Support IEEE 802.3x Flow-control for Full-duplex and Back Pressure Flow Control for Half-duplex
• Bridging Capability for 100Mbps and 10Mbps Segments
• All Ports Support Auto-MDI/MDI-X and Auto-negotiation Functions

Specifications:

Model
CSH-2402S

Standards
• IEEE 802.3: 10BASE-T
• IEEE 802.3u: 100BASE-TX
• IEEE 802.3x: Flow-control for Full-duplex operation

Ports
• 24 Ports 10BASE-T /100BASE-TX with 2 ports share Copper/Fiber (100BASE-FX)

Media Support
• 10BASE-T: Category 3, 4 or 5 TP
• 100BASE-TX: Category 5 TP
• 100BASE-FX: 62.5/125m Multi-mode fiber cable(SC type connector)

Bandwidth
• 10BASE-T: 10/20Mbps
• 100BASE-TX: 100/200Mbps
• 100BASE-FX: 100/200Mbps

Forwarding/Filtering Rate
• 14881 packets/second per port @ 10Mbps maximum
• 148810 packets/second per port @ 100Mbps maximum

Duplex Modes
• Support Auto-negotiation and Auto-MDI/MDI-X function

Switch
• When SW1 OFF,SW2 OFF ; port 12,24 are TP ports
• When SW1 OFF,SW2 ON ; port 12 is Fiber port, port 24 is TP port
• When SW1 ON,SW2 OFF ; port 12 is disable, port 24 is TP port
• When SW1 ON,SW2 ON ; port 12,24 are Fiber ports

LED Indicators
• One LED displays Power status
• One LED per port displays Link/ACT status

Power Supply
• Internal Full Range Auto-Switching
• Input voltage: 100 ~ 240 +/-10%VAC/ 50 ~ 60 Hz

Power Consumption
• 13.2W maximum

Environment
• Operating Temperature: 0° ~ 45° C (32° ~ 113° F)
• Storage Temperature:-20° ~70° C (-4° ~ 158° F)
• Humidity: 10% ~ 90% Non-condensing

Certifications
• CE, FCC, CTick

Dimensions(L x W x H)
• 442 x 130 x 44mm(17.40 x 5.12 x 1.73 inches)

Click here for more info.